Lakewood, MN Mold Damage Remediation
It only takes a small water leak, or even excess humidity, for mold to form in your Lakewood home or business. Then, mold can spread quickly through the property in as little as 48 hours. Mold can produce allergens and irritants, and it has the potential to cause other health effects. If your home or business has a mold problem, we can inspect and assess your property and use our specialized training, equipment, and expertise to remediate your mold infestation.
Learn more about mold and what to do until help arrives by reviewing these mold damage tips.
SERVPRO of The Twin Ports
- 24-Hour Emergency Service
- Faster to Any Size Disaster
- Highly Trained Mold Remediation Technicians
- Specialized Mold Remediation Equipment
- A Trusted Leader in the Restoration Industry
- Locally Owned and Operated
If You See Signs of Mold, Call Us Today – (218) 727-2575
Confusion and misunderstanding surround the topic of mold and mold remediation. Some restoration businesses even make claims to remove all mold from a building. This is a fallacy. Mold spores occur naturally almost everywhere, both indoors and outdoors. These microscopic spores float along in the air and can enter a home or business through windows and HVAC systems. Consider these facts:
- Mold is present almost everywhere, indoors and outdoors.
- Mold spores are microscopic and float along in the air, and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or on a pet.
- Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens, irritants, and toxins.
- Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
- Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
- Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.
Faster to Any Size Disaster
Mold spreads quickly, so a minor mold infestation can quickly escalate into a major problem. We’re dedicated to responding immediately when you contact us. A fast response lessens the damage, limits further damage, and reduces cost.
Locally Owned, with National Resources
We live and work in this community too; we might even be neighbors. As a locally owned and operated business, SERVPRO of The Twin Ports is close by and ready to respond to your mold damage emergency. We are proud to be an active member of the Lakewood community and want to pitch in and help make our community the best it can be.
We are proud to serve our local communities:
- Duluth, MN
- Superior, MN
- West Duluth, MN
- New Duluth, MN
- Billings Park, MN
- Superior Village, MN
- Lakewood, MN
Highly Trained Water and Mold Restoration Specialists
As water and mold damage specialists, we have the experience, the expertise, and the advanced training that enables us to get your property restored quickly and thoroughly. Learn about our water and mold training and certificates.
The Mold Remediation Process
Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our “typical” process:
Step 1: Emergency Contact - (218) 727-2575
The mold cleanup and restoration process begins when you call us. Our representative will ask a series of questions to help us determine the necessary equipment, resources, and personnel.
Step 2: Inspection and Mold Damage Assessment
We determine the scope of the mold damage by carefully inspecting your property for visible signs of mold. Since mold can be hidden, we use various technologies to detect mold and hidden water sources.
Step 3: Mold Containment
To keep the mold spores from spreading further, we will use various mold containment procedures. Our professionals may use physical barriers and negative air pressure to isolate the contaminated area and to help prevent the mold spores from spreading through your Lakewood, MN home or business. Also, we’ll turn off the property’s fans and heating and cooling systems to prevent the spread of mold.
Step 4: Air Filtration
We use powerful air scrubbers, HEPA vacuums, and other filtration equipment to remove microscopic mold spores out of the air. This air filtration process and our mold containment process help to prevent the spread of these mold spores while the mold remediation is in process.
Step 5: Removing Mold and Mold-Infested Materials
The mold remediation process depends on the amount of mold growth and the types of surfaces on which the mold appears. We’ll use antifungal and antimicrobial treatments to eliminate mold colonies and to help prevent new colonies from forming. It may be necessary to remove and dispose of mold-infested porous materials, like drywall and carpeting, to remediate heavy mold growth.
Step 6: Cleaning Contents and Sanitizing
We clean your furniture, decorative items, curtains, clothing, and other restorable items affected by mold, using a variety of cleaning techniques to clean and disinfect your belongings. We’re also trained to remove odors and provide deodorization using fogging equipment.
Step 7: Restoration
During the remediation process, it’s often necessary to remove porous building materials like subfloors, drywall, and carpet. The restoration step returns your Lakewood, MN home or business back to normal. Depending on the severity of mold damage, the restoration step may involve minor repairs, such as replacing drywall, or it may involve a substantial reconstruction project.
SERVPRO knows Mold
Here at SERVPRO of The Twin Ports we understand what it takes to properly remediate a mold situation in Lakewood, MN. Encountering mold can be worrisome for any homeowner, but SERVPRO is here to put your mind at ease. We have the right tools and trained professionals to get the job done right. Give us a call at (218) 727-2575 and we will be on our way to help.